DenseiUSA

Model BCH5532 Bar Code Reader

Features

High move tolerance
Reads a bar code moving in vertical and/or horizontal directions at a relative speed of 10 inches per second. This allows faster and more accurate data entry.
High resolution
Reads almost any bar code symbol, even labels on irregular and curved surfaces, thanks to its high resolution (5 mils) CCD imager.
Reads all standard codes
Automatically discriminates and reads UPC/EAN, CODE39, CODABAR, Interleaved 2 of 5, CODE128 and CODE93 codes. It can also read UPC/EAN with 2- or 5-digit addendum.
Auto triggering
Electronic sensing of the bar code label speeds operation and further reduces fatigue.
Reads poorly printed symbols
Advanced circuitry and optics enable the scanner to read dirty or low contrast bar codes with PCS values as low as 0.3.
Double trigger switches
Right side only, left side only, or both sides active.
Maintenance-free over a long life
The totally solid-state design has no moving parts, allowing for stable operation without maintenance or adjustments.
Single voltage operation
Operates on a single 5 volt (100 mA TYP.) power supply, allowing compatibility with the standard voltages available with the respective interfaces.
Multi-function selection via bar code menu
It is easy to set the operating functions, including data transfer format, symbology, the number of digits and so on, using a bar code menu.

Specifications

Series BCH5000

Model BCH5532

Code JAH1310 JAH1312

Output RS-232C

Readable bar codes UPC/EAN, CODE39, CODABAR, Interleaved 2 of 5, CODE128 and CODE93
Selectable decoding functions: UPC/EAN with 2 or 5-digit addendum

Maximum Bar code width 3.3 in. (85 mm) (including 1 unit of space at each end)

Min. resolution 5 mils (0.125 mm)

Depth of field 0.8 in. (20 mm) TYP. (UPC/EAN standard labelx 1, PCS: 0.9)

Move tolerance 10 in./sec. at any angle of incidence

Light source Red LED (wavelength: 660nm)

Detecting element CCD imager

Min. PCS value 0.3 (white reflection: 85% or more)

Reading start method Auto or manual start selectable

Reading indicator Beeper and LED

Decoder Integrated into reading head

Voltage requirements 5 VDC +/- IO%

Power consumption 100 mA TYP (max. 15 mA in portable mode)

Weight (without cable) 5.3 oz. (150 g)

Cable length 6.6 ft. (2 m)

Connector* DIN 8 pin (male) 9 pin screw lock D

Max. external illumination 5000 lux TYP.

Operating temperature 32 deg. F to 104 deg. F (O deg. C to 40 deg. C)

Operating humidity 10% to 95% RH (non-condensing)

Drop durability Unit functions normally after 3.3 ft. (1 m) drop onto concrete surface

Noise standard FCC Class A (FCC Class B pending)

External View Some of the Key Functions Selected via Bar Code Menu

Output
Baud rate: 150 to 19,200 baud Data bits: 7 or 8 bits Parity: even, odd, mark, or space.

Symbology Variables
Bar code type, bar code length, etc.

Reading start method
Auto or manual start

Beeper Control
On/Off
Volume: high/low
Tone: high/low

Multiple bar code labels
Up to 6 reads can be appended

Home | Corporate | Products | Support | Contact Us

Specifications
Series	BCH5000
Model	BCH5532
Code	JAH1310	JAH1312
Output	RS-232C
Readable bar codes	UPC/EAN, CODE39, CODABAR, Interleaved 2 of 5, CODE128 and CODE93 Selectable decoding functions: UPC/EAN with 2 or 5-digit addendum
Maximum Bar code width	3.3 in. (85 mm) (including 1 unit of space at each end)
Min. resolution	5 mils (0.125 mm)
Depth of field	0.8 in. (20 mm) TYP. (UPC/EAN standard labelx 1, PCS: 0.9)
Move tolerance	10 in./sec. at any angle of incidence
Light source	Red LED (wavelength: 660nm)
Detecting element	CCD imager
Min. PCS value	0.3 (white reflection: 85% or more)
Reading start method	Auto or manual start selectable
Reading indicator	Beeper and LED
Decoder	Integrated into reading head
Voltage requirements	5 VDC +/- IO%
Power consumption	100 mA TYP (max. 15 mA in portable mode)
Weight (without cable)	5.3 oz. (150 g)
Cable length	6.6 ft. (2 m)
Connector*	DIN 8 pin (male)	9 pin screw lock D
Max. external illumination	5000 lux TYP.
Operating temperature	32 deg. F to 104 deg. F (O deg. C to 40 deg. C)
Operating humidity	10% to 95% RH (non-condensing)
Drop durability	Unit functions normally after 3.3 ft. (1 m) drop onto concrete surface
Noise standard	FCC Class A (FCC Class B pending)

External View	Some of the Key Functions Selected via Bar Code Menu

	Output Baud rate: 150 to 19,200 baud Data bits: 7 or 8 bits Parity: even, odd, mark, or space. Symbology Variables Bar code type, bar code length, etc. Reading start method Auto or manual start Beeper Control On/Off Volume: high/low Tone: high/low Multiple bar code labels Up to 6 reads can be appended